About: EMC E1

An Entity of Type: mean of transportation, from Named Graph: http://dbpedia.org, within Data Space: dbpedia.org

The EMC E1 was an early passenger-train diesel locomotive developing 1,800 hp, with an A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation of La Grange, Illinois. They were built during 1937 and 1938 for the Atchison, Topeka and Santa Fe Railway for a new generation of diesel-powered streamlined trains. 8 cab-equipped lead A units and three cabless booster B units were built. The initial three locomotives were AB pairs built to haul the Santa Fe's Super Chief diesel streamliners, while the others were built as single A units to haul shorter trains. The locomotives were diesel-electrics with two 900 hp (670 kW) Winton 201-A engines each, with each engine driving its own generator to power the traction motors. The E1 was the second model in a long line of passenger dies

Property Value
dbo:abstract
  • The EMC E1 was an early passenger-train diesel locomotive developing 1,800 hp, with an A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation of La Grange, Illinois. They were built during 1937 and 1938 for the Atchison, Topeka and Santa Fe Railway for a new generation of diesel-powered streamlined trains. 8 cab-equipped lead A units and three cabless booster B units were built. The initial three locomotives were AB pairs built to haul the Santa Fe's Super Chief diesel streamliners, while the others were built as single A units to haul shorter trains. The locomotives were diesel-electrics with two 900 hp (670 kW) Winton 201-A engines each, with each engine driving its own generator to power the traction motors. The E1 was the second model in a long line of passenger diesels of similar design known as EMD E-units. All Winton 201A-engined Santa Fe passenger units, including the E1s, were extensively rebuilt into the 80-class E8M engines in 1952-53. These were similar to production E8 models, but derated to 2000 hp so as not to burn out the early traction (axle) motors (which were reused). (en)
  • A EMD E1 ou EMC E-1 foi uma locomotiva diesel-elétrica para transporte de passageiros, que desenvolvia 1,800 Hp e possuía um arranjo de rodeiros . Fabricada pela Electro-Motive Corporation de La Grange, Illinois, EUA construída entre 1937 e 1938 para a Atchison, Topeka and Santa Fe Railway (ATSF) na intenção de criar um novo segmento de locomotivas padronizadas a diesel. Oito unidades principais chamadas de A Unit foram construídas e mais três unidades secundárias de apoio chamadas de B Unit. As três primeiras locomotivas na configuração AB (principal e secundária), foram entregues para a ferrovia ATSF elas foram utilizadas na linha Super Chief da ferrovia e as demais locomotivas designadas na configuração A (só a unidade principal) para trens menores. Estas locomotivas possuíam dois motores Winton 201-A de 900 Hp. A E1 foi o segundo modelo na longa linha de locomotivas de passageiros a diesel de design similar conhecidas como "". (pt)
  • E1型柴油机车是美国通用汽车电气动力公司(EMC)为艾奇遜,托皮卡和聖塔菲鐵路设计制造的一款干线客运柴油机车,也是电气动力公司第二款E系列柴油机车。 1937年,电气动力公司同时推出三款大同小异的干线客运柴油机车,分别是为巴爾的摩與俄亥俄鐵路提供的EA/EB型柴油机车、为聖塔菲鐵路提供的E1型柴油机车,以及为联合太平洋铁路、芝加哥和西北鐵路、南太平洋鐵路提供的E2型柴油机车。每组机车是由一节设有司机室的A节机车,和一节无司机室的B节机车固定重联而成,机车采用整体承载结构的棚式车体。作为老牌汽车制造商的通用汽车深知车辆外形设计的重要性,因此在这三款柴油机车均采用了创新的流线型外形,其中EA/EB、E1型柴油机车使用俗称为“斜鼻子”(slant nose)的车头,而E2型柴油机车则使用俗称为“斗牛犬”(bulldog nose)的车头。 每节机车装有两组完全相同的900马力柴油发电机组,采用两台温顿发动机公司的12-201A型二冲程柴油机。电传动系统由两台D4型直流牵引发电机和四台D7型直流牵引电动机组成,机车单节功率为1800马力,A节机车还设有电阻制动装置。每节机车均采用轴式配置,走行部为两台布贝格式三轴转向架,转向架的中间轴没有牵引电动机。这种转向架由工程师设计,车体重量通过中心销、摇枕、构架等部件由两台转向架承担,这种转向架以后成为了易安迪E系列、F系列柴油机车的标准转向架。 1937年6月至1939年4月期间,电气动力公司为聖塔菲鐵路制造了11台E1型柴油机车,当中包括8台A节机车、3台B节机车,主要担当“”、“”、“”和“”旅客列车的牵引任务。1952年至1953年间,聖塔菲鐵路将所有E1型柴油机车改造成E8M型柴油机车。 (zh)
dbo:activeYearsEndYear
  • 1938-01-01 (xsd:gYear)
dbo:activeYearsStartYear
  • 1937-01-01 (xsd:gYear)
dbo:builder
dbo:numberBuilt
  • 8 (xsd:nonNegativeInteger)
dbo:powerType
dbo:thumbnail
dbo:wikiPageExternalLink
dbo:wikiPageID
  • 1312854 (xsd:integer)
dbo:wikiPageLength
  • 9295 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 1073969463 (xsd:integer)
dbo:wikiPageWikiLink
dbp:aarwheels
  • A1A-A1A (en)
dbp:builddate
  • 1937 (xsd:integer)
dbp:builder
dbp:caption
  • A 1938 publicity photo of Santa Fe's Golden Gate passenger train pulled by ATSF E1 no. 8, which was used exclusively for Golden Gate service (en)
dbp:disposition
  • All scrapped (en)
dbp:fleetnumbers
  • 2 (xsd:integer)
dbp:maxspeed
  • up to 116 mph (en)
dbp:name
  • EMC E1 (en)
dbp:operator
dbp:powertype
  • Diesel-electric (en)
dbp:primemover
  • Winton 201-A, 2 off (en)
dbp:totalproduction
  • 8 (xsd:integer)
dbp:wikiPageUsesTemplate
dbp:wordnet_type
dcterms:subject
gold:hypernym
rdf:type
rdfs:comment
  • The EMC E1 was an early passenger-train diesel locomotive developing 1,800 hp, with an A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation of La Grange, Illinois. They were built during 1937 and 1938 for the Atchison, Topeka and Santa Fe Railway for a new generation of diesel-powered streamlined trains. 8 cab-equipped lead A units and three cabless booster B units were built. The initial three locomotives were AB pairs built to haul the Santa Fe's Super Chief diesel streamliners, while the others were built as single A units to haul shorter trains. The locomotives were diesel-electrics with two 900 hp (670 kW) Winton 201-A engines each, with each engine driving its own generator to power the traction motors. The E1 was the second model in a long line of passenger dies (en)
  • A EMD E1 ou EMC E-1 foi uma locomotiva diesel-elétrica para transporte de passageiros, que desenvolvia 1,800 Hp e possuía um arranjo de rodeiros . Fabricada pela Electro-Motive Corporation de La Grange, Illinois, EUA construída entre 1937 e 1938 para a Atchison, Topeka and Santa Fe Railway (ATSF) na intenção de criar um novo segmento de locomotivas padronizadas a diesel. Oito unidades principais chamadas de A Unit foram construídas e mais três unidades secundárias de apoio chamadas de B Unit. As três primeiras locomotivas na configuração AB (principal e secundária), foram entregues para a ferrovia ATSF elas foram utilizadas na linha Super Chief da ferrovia e as demais locomotivas designadas na configuração A (só a unidade principal) para trens menores. Estas locomotivas possuíam dois motor (pt)
  • E1型柴油机车是美国通用汽车电气动力公司(EMC)为艾奇遜,托皮卡和聖塔菲鐵路设计制造的一款干线客运柴油机车,也是电气动力公司第二款E系列柴油机车。 1937年,电气动力公司同时推出三款大同小异的干线客运柴油机车,分别是为巴爾的摩與俄亥俄鐵路提供的EA/EB型柴油机车、为聖塔菲鐵路提供的E1型柴油机车,以及为联合太平洋铁路、芝加哥和西北鐵路、南太平洋鐵路提供的E2型柴油机车。每组机车是由一节设有司机室的A节机车,和一节无司机室的B节机车固定重联而成,机车采用整体承载结构的棚式车体。作为老牌汽车制造商的通用汽车深知车辆外形设计的重要性,因此在这三款柴油机车均采用了创新的流线型外形,其中EA/EB、E1型柴油机车使用俗称为“斜鼻子”(slant nose)的车头,而E2型柴油机车则使用俗称为“斗牛犬”(bulldog nose)的车头。 每节机车装有两组完全相同的900马力柴油发电机组,采用两台温顿发动机公司的12-201A型二冲程柴油机。电传动系统由两台D4型直流牵引发电机和四台D7型直流牵引电动机组成,机车单节功率为1800马力,A节机车还设有电阻制动装置。每节机车均采用轴式配置,走行部为两台布贝格式三轴转向架,转向架的中间轴没有牵引电动机。这种转向架由工程师设计,车体重量通过中心销、摇枕、构架等部件由两台转向架承担,这种转向架以后成为了易安迪E系列、F系列柴油机车的标准转向架。 (zh)
rdfs:label
  • EMC E1 (en)
  • EMD E1 (pt)
  • E1型柴油机车 (zh)
owl:sameAs
prov:wasDerivedFrom
foaf:depiction
foaf:isPrimaryTopicOf
foaf:name
  • EMC E1 (en)
is dbo:wikiPageRedirects of
is dbo:wikiPageWikiLink of
is foaf:primaryTopic of
Powered by OpenLink Virtuoso    This material is Open Knowledge     W3C Semantic Web Technology     This material is Open Knowledge    Valid XHTML + RDFa
This content was extracted from Wikipedia and is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License