An Entity of Type: company, from Named Graph: http://dbpedia.org, within Data Space: dbpedia.org

Stored program control (SPC) is a telecommunications technology used for telephone exchanges controlled by a computer program stored in the memory of the switching system. SPC was the enabling technology of electronic switching systems (ESS) developed in the Bell System in the 1950s, and may be considered the third generation of switching technology. Stored program control was invented in 1954 by Bell Labs scientist Erna Schneider Hoover, who reasoned that computer software could control the connection of telephone calls.

Property Value
dbo:abstract
  • Stored program control (SPC) is a telecommunications technology used for telephone exchanges controlled by a computer program stored in the memory of the switching system. SPC was the enabling technology of electronic switching systems (ESS) developed in the Bell System in the 1950s, and may be considered the third generation of switching technology. Stored program control was invented in 1954 by Bell Labs scientist Erna Schneider Hoover, who reasoned that computer software could control the connection of telephone calls. (en)
  • Stored Program Control exchange (SPC) Centrale Sterowane Programowo – określenie odnoszące się do central telekomunikacyjnych. Zostały one wprowadzone na małą skale w latach 60. XX wieku. W latach 70. przejęły cały rynek.Pierwszą z nich była centrala wyprodukowana przez AT&T w 1956 r. (pl)
  • Datorstyrda telefonstationer, eller SPC-system (Stored Program Control - programminnesstyrda), som den tekniska termen lyder, innebär att telefonväxeln styrs av datorprogram. SPC-systemen introducerades så smått under 1960-talet, till exempel (1965) från Bell System och Ericssons AKE 12 (1968), och i större omfattning under 1970-talet (till exempel AXE). SPC-tekniken innebar lägre totalkostnad (installation, drift och handhavande), större flexibilitet, möjliggjorde nya mervärdestjänster samt banade väg för helt nya telekommunikations-tillämpningar som till exempel mobiltelefoni. Utvecklingen av SPC-system brukar beskrivas i termer av generationer. Den första generationen (som till exempel AKE och No. 1 ESS) kännetecknas av att väljaren är analog (analoga telefonförbindelser genomkopplas galvaniskt genom växeln) samt att datorstyrningen görs av en eller flera centralprocessorer. Andra generationens SPC-system (till exempel AXE och ) kännetecknas av digital väljare (digitala telefonförbindelser genomkopplas elektroniskt) och i den tredje generationens SPC-system tillkommer att datorstyrningen sker i distribuerade system.Sedan 1980-talet är så gott som alla nytillverkade telefonväxlar datorstyrda och digitala. (sv)
  • 程控交换机,也称为程控数字交换机或数字程控交换机,通常专指用于电话交换网的交换设备,它以计算机程序控制电话的接续。 数字程控交换机分为长途交换机,本地交换机等。另外还有专用于和智能网的类型。 数字程控交换机的基本功能为:用户线接入,中继接续,,设备管理等。 本地交换机自动检测用户的摘机动作,给用户的电话机回送拨号音,接收话机产生的脉冲信号或双音多频(DTMF)信号,然后完成从主叫到被叫号码的接续(被叫号码可能在同一个交换机也可能在不同的交换机)。在接续完成后,交换机将保持连接,直到检测出通信的一方挂机。 (zh)
dbo:wikiPageID
  • 7092252 (xsd:integer)
dbo:wikiPageLength
  • 13445 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 1117250801 (xsd:integer)
dbo:wikiPageWikiLink
dbp:wikiPageUsesTemplate
dcterms:subject
gold:hypernym
rdf:type
rdfs:comment
  • Stored program control (SPC) is a telecommunications technology used for telephone exchanges controlled by a computer program stored in the memory of the switching system. SPC was the enabling technology of electronic switching systems (ESS) developed in the Bell System in the 1950s, and may be considered the third generation of switching technology. Stored program control was invented in 1954 by Bell Labs scientist Erna Schneider Hoover, who reasoned that computer software could control the connection of telephone calls. (en)
  • Stored Program Control exchange (SPC) Centrale Sterowane Programowo – określenie odnoszące się do central telekomunikacyjnych. Zostały one wprowadzone na małą skale w latach 60. XX wieku. W latach 70. przejęły cały rynek.Pierwszą z nich była centrala wyprodukowana przez AT&T w 1956 r. (pl)
  • 程控交换机,也称为程控数字交换机或数字程控交换机,通常专指用于电话交换网的交换设备,它以计算机程序控制电话的接续。 数字程控交换机分为长途交换机,本地交换机等。另外还有专用于和智能网的类型。 数字程控交换机的基本功能为:用户线接入,中继接续,,设备管理等。 本地交换机自动检测用户的摘机动作,给用户的电话机回送拨号音,接收话机产生的脉冲信号或双音多频(DTMF)信号,然后完成从主叫到被叫号码的接续(被叫号码可能在同一个交换机也可能在不同的交换机)。在接续完成后,交换机将保持连接,直到检测出通信的一方挂机。 (zh)
  • Datorstyrda telefonstationer, eller SPC-system (Stored Program Control - programminnesstyrda), som den tekniska termen lyder, innebär att telefonväxeln styrs av datorprogram. SPC-systemen introducerades så smått under 1960-talet, till exempel (1965) från Bell System och Ericssons AKE 12 (1968), och i större omfattning under 1970-talet (till exempel AXE). SPC-tekniken innebar lägre totalkostnad (installation, drift och handhavande), större flexibilitet, möjliggjorde nya mervärdestjänster samt banade väg för helt nya telekommunikations-tillämpningar som till exempel mobiltelefoni. (sv)
rdfs:label
  • SPC (telekomunikacja) (pl)
  • Stored program control (en)
  • SPC-system (sv)
  • 程控交换机 (zh)
owl:sameAs
prov:wasDerivedFrom
foaf:isPrimaryTopicOf
is dbo:wikiPageDisambiguates of
is dbo:wikiPageRedirects of
is dbo:wikiPageWikiLink of
is foaf:primaryTopic of
Powered by OpenLink Virtuoso    This material is Open Knowledge     W3C Semantic Web Technology     This material is Open Knowledge    Valid XHTML + RDFa
This content was extracted from Wikipedia and is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License