| dbo:Engine/cylinderBore
| |
| dbo:Engine/displacement
| |
| dbo:Engine/pistonStroke
| |
| dbo:Engine/powerOutput
| |
| dbo:abstract
|
- The Nissan C-series was an inline-four automobile engine produced in the 1950s and into the 1960s. It displaced 1.0 L (988 cc) and produced 37 hp (27.6 kW) and 47.7 to 49 lb·ft (64.7 to 66.4 Nm). It was a pushrod engine and used single or dual-26 mm carburetors. The C engine was derived from the 1.5 L Nissan 1H (1489 cc) engine, itself a licence built version of the 1.5 BMC B-Series engine that featured a 73 mm bore x 89 mm stroke. To create the C engine, Nissan under the advice of American engineer Donald Stone (formerly of Willys-Overland) followed his suggestion of de-stroking the 1.5 engine from 89 mm to 59 mm, with the resulting C1 engine being called the "Stone engine" in his honor. When it was later increased to 1.2 L via an increased stroke from 59 mm to 71mm, it was called the Nissan E engine. The Nissan C engine would go on to be directly replaced by the Nissan A engine in the 1967 Nissan Sunny B10, whose 1-litre A10 unit shared virtually the same displacement and same 73mm bore x 59mm stroke as the C engine. Applications:
* 1957-1959 Datsun 210/211
* 1957-1960 Datsun 220/221/222 Truck
* 1959-1960 Datsun S211
* 1959.08-1963 Datsun Bluebird 310
* 1963.09-1964.09 Datsun Bluebird 410 (en)
|
| dbo:blockAlloy
| |
| dbo:compressionRatio
| |
| dbo:coolingSystem
| |
| dbo:cylinderBore
| |
| dbo:displacement
| |
| dbo:fuelSystem
| |
| dbo:fuelType
| |
| dbo:headAlloy
| |
| dbo:manufacturer
| |
| dbo:pistonStroke
| |
| dbo:powerOutput
|
- 27591.720660 (xsd:double)
|
| dbo:predecessor
| |
| dbo:productionEndYear
| |
| dbo:productionStartYear
| |
| dbo:successor
| |
| dbo:thumbnail
| |
| dbo:valvetrain
| |
| dbo:wikiPageID
| |
| dbo:wikiPageLength
|
- 2973 (xsd:nonNegativeInteger)
|
| dbo:wikiPageRevisionID
| |
| dbo:wikiPageWikiLink
| |
| dbp:aka
| |
| dbp:block
| |
| dbp:bore
| |
| dbp:compression
| |
| dbp:configuration
| |
| dbp:coolingsystem
| |
| dbp:displacement
| |
| dbp:fuelsystem
| |
| dbp:fueltype
| |
| dbp:head
| |
| dbp:manufacturer
| |
| dbp:name
| |
| dbp:power
| |
| dbp:predecessor
| |
| dbp:production
| |
| dbp:stroke
| |
| dbp:successor
| |
| dbp:timing
| |
| dbp:torque
| |
| dbp:valvetrain
| |
| dbp:wikiPageUsesTemplate
| |
| dcterms:subject
| |
| gold:hypernym
| |
| rdf:type
| |
| rdfs:comment
|
- The Nissan C-series was an inline-four automobile engine produced in the 1950s and into the 1960s. It displaced 1.0 L (988 cc) and produced 37 hp (27.6 kW) and 47.7 to 49 lb·ft (64.7 to 66.4 Nm). It was a pushrod engine and used single or dual-26 mm carburetors. The Nissan C engine would go on to be directly replaced by the Nissan A engine in the 1967 Nissan Sunny B10, whose 1-litre A10 unit shared virtually the same displacement and same 73mm bore x 59mm stroke as the C engine. Applications: (en)
|
| rdfs:label
| |
| owl:sameAs
| |
| prov:wasDerivedFrom
| |
| foaf:depiction
| |
| foaf:isPrimaryTopicOf
| |
| foaf:name
|
- Nissan C engine (en)
- Stone engine (en)
|
| is dbo:engine
of | |
| is dbo:predecessor
of | |
| is dbo:successor
of | |
| is dbo:wikiPageRedirects
of | |
| is dbo:wikiPageWikiLink
of | |
| is dbp:predecessor
of | |
| is foaf:primaryTopic
of | |
