| dbo:abstract
|
- In integrated circuit design, physical design is a step in the standard design cycle which follows after the circuit design. At this step, circuit representations of the components (devices and interconnects) of the design are converted into geometric representations of shapes which, when manufactured in the corresponding layers of materials, will ensure the required functioning of the components. This geometric representation is called integrated circuit layout. This step is usually split into several sub-steps, which include both design and verification and validation of the layout. Modern day Integrated Circuit (IC) design is split up into Front-end Design using HDLs and Back-end Design or Physical Design. The inputs to physical design are (i) a netlist, (ii) library information on the basic devices in the design, and (iii) a technology file containing the manufacturing constraints. Physical design is usually concluded by Layout Post Processing, in which amendments and additions to the chip layout are performed. This is followed by the Fabrication or Manufacturing Process where designs are transferred onto silicon dies which are then packaged into ICs. Each of the phases mentioned above has design flows associated with them. These design flows lay down the process and guide-lines/framework for that phase. The physical design flow uses the technology libraries that are provided by the fabrication houses. These technology files provide information regarding the type of silicon wafer used, the standard-cells used, the layout rules (like DRC in VLSI), etc. (en)
- 在集成电路设计中，物理设计（英語：physical design）是完成功能设计之后的一个流程。在这一步，经过布图规划、布局、布线等具体过程后，以硬件描述语言等抽象形式表达的电路网表会被转换成代表电路的几何图形，这个几何图形被称为集成电路版图。半导体工厂根据版图文件就可以制造出实际的硬件电路。除了前面提到的具体过程，物理设计还包括一系列对于版图的设计和验证。 (zh)
|
| dbo:thumbnail
| |
| dbo:wikiPageID
| |
| dbo:wikiPageLength
|
- 13334 (xsd:nonNegativeInteger)
|
| dbo:wikiPageRevisionID
| |
| dbo:wikiPageWikiLink
| |
| dbp:wikiPageUsesTemplate
| |
| dcterms:subject
| |
| gold:hypernym
| |
| rdf:type
| |
| rdfs:comment
|
- 在集成电路设计中，物理设计（英語：physical design）是完成功能设计之后的一个流程。在这一步，经过布图规划、布局、布线等具体过程后，以硬件描述语言等抽象形式表达的电路网表会被转换成代表电路的几何图形，这个几何图形被称为集成电路版图。半导体工厂根据版图文件就可以制造出实际的硬件电路。除了前面提到的具体过程，物理设计还包括一系列对于版图的设计和验证。 (zh)
- In integrated circuit design, physical design is a step in the standard design cycle which follows after the circuit design. At this step, circuit representations of the components (devices and interconnects) of the design are converted into geometric representations of shapes which, when manufactured in the corresponding layers of materials, will ensure the required functioning of the components. This geometric representation is called integrated circuit layout. This step is usually split into several sub-steps, which include both design and verification and validation of the layout. (en)
|
| rdfs:label
|
- Physical design (electronics) (en)
- 物理设计 (zh)
|
| owl:sameAs
| |
| prov:wasDerivedFrom
| |
| foaf:depiction
| |
| foaf:isPrimaryTopicOf
| |
| is dbo:wikiPageDisambiguates
of | |
| is dbo:wikiPageRedirects
of | |
| is dbo:wikiPageWikiLink
of | |
| is foaf:primaryTopic
of | |
