An Entity of Type: place, from Named Graph: http://dbpedia.org, within Data Space: dbpedia.org:8891

A tonnage monitor is a meter used on a stamping press to measure the force applied by the ram. In a press, the cutting and forming tools in the die will wear down, requiring increasing effort to stamp the part. A tonnage monitor allows the user to observe this degradation and decide when it is time to sharpen and adjust the die. It generally uses strain gauges attached to the frame or tie rods of the press. The gauges provide an electric signal by means of piezoelectric effect as they are stretched during press operation.

Property Value
dbo:abstract
  • A tonnage monitor is a meter used on a stamping press to measure the force applied by the ram. In a press, the cutting and forming tools in the die will wear down, requiring increasing effort to stamp the part. A tonnage monitor allows the user to observe this degradation and decide when it is time to sharpen and adjust the die. It generally uses strain gauges attached to the frame or tie rods of the press. The gauges provide an electric signal by means of piezoelectric effect as they are stretched during press operation. The tonnage monitor may provide any of the following additional features: * Warning indication when the load exceeds a setpoint * A press stop signal to halt the press at the top of the stroke for when the load exceeds a set point. This signal is generally used to watch for sudden events such as a tool breaking or a part becoming jammed. * Recording of successive press hits to show the operational trend * Graphing of a single stroke. With a progressive die, such a graph can be used by the tool and die maker to view the operation of the different cutting pieces and thereby optimize tool performance. (en)
dbo:wikiPageID
  • 19462315 (xsd:integer)
dbo:wikiPageLength
  • 1186 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 944187187 (xsd:integer)
dbo:wikiPageWikiLink
dcterms:subject
gold:hypernym
rdf:type
rdfs:comment
  • A tonnage monitor is a meter used on a stamping press to measure the force applied by the ram. In a press, the cutting and forming tools in the die will wear down, requiring increasing effort to stamp the part. A tonnage monitor allows the user to observe this degradation and decide when it is time to sharpen and adjust the die. It generally uses strain gauges attached to the frame or tie rods of the press. The gauges provide an electric signal by means of piezoelectric effect as they are stretched during press operation. (en)
rdfs:label
  • Tonnage monitor (en)
owl:sameAs
prov:wasDerivedFrom
foaf:isPrimaryTopicOf
is dbo:wikiPageRedirects of
is dbo:wikiPageWikiLink of
is foaf:primaryTopic of
Powered by OpenLink Virtuoso    This material is Open Knowledge     W3C Semantic Web Technology     This material is Open Knowledge    Valid XHTML + RDFa
This content was extracted from Wikipedia and is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License