| dbo:abstract
|
- The first passenger carriages of the Victorian Railways (VR) were fixed-wheel, with a mixture of first- and second-class bodies on either four- or six-wheeled underframes. They were built to the British side-loading, swing-door, cross bench compartment (non-corridor) style; later a saloon style was used to a limited extent, featuring fewer doors per side and perimeter seating - which increased total capacity by allowing more standing passengers. Initial designs had some common themes: A and B type carriages were for first- and second-class travellers; C indicated third-class initially, though later was re-allocated for flat wagons to transport horse-drawn carriages, and later still for hearse vans (the first three of which had been modified from E class mail vans); D was used for guards' vans, E for mail vans, and F for horse boxes. The first vehicles were built on four-wheeled underframes, with some later designs (mostly first-class) being built on six-wheel underframes. Some cars were built locally, while others were imported. Between 1860 and 1880 the Victorian Railways took-over a number of private railway operators, and their rollingstock was absorbed into the VR fleet, being renumbered to suit. This explains why records show some cars as being built in 1855, even though the Victorian Railways did not start operating until 1858. At first, fleet numbers of each type of carriage were generally kept consecutive with no regard for differing capacities or axle loads. When a vehicle was scrapped, either a new one would be built with the same number, or another existing car would be renumbered to fill the gap. Some later cars were built or re-coded with multiple letters, such as AB, AD, BD and ABD. Another category was introduced for older cars which allowed them to be used in restricted service; a superscript H added to the class to indicate Holiday traffic - BH. This H superscript was initially just a clerical note next to the code, although it later became an official part of the code. Initially only second-class carriages were marked as such. When bogie carriages were added to the fleet, they initially were allocated vacant numbers in the appropriate class series, one of the first examples being 70 A. From 1886 the bogie cars were re-coded as AA, BB, or ABAB; it is thought that this was necessary due to mix-ups with carriage capacities. Twenty seven bogie carriages of the American end-loading saloon design had been built for the Victorian Railways between 1874 and 1887 (thereafter, so-called dog box bogie cars were built), along with at least one bogie double-saloon car inherited from the former private suburban railway company (those cars were re-classed about the same time). As bogie carriages displaced their fixed-wheel predecessors, the older cars were reassigned to other duties. In particular, with the majority of bogie carriages being first-class, first-class fixed-wheel vehicles were downgraded to second-class and re-coded as 'B'. Cars still in service in the 1940s were converted to workmen's sleepers known as WS or W Class; three of the latter were placed on bogie underframes and became WW class. (en)
|
| dbo:manufacturer
| |
| dbo:numberBuilt
|
- 2000 (xsd:nonNegativeInteger)
|
| dbo:operator
| |
| dbo:thumbnail
| |
| dbo:wikiPageExternalLink
| |
| dbo:wikiPageID
| |
| dbo:wikiPageLength
|
- 57365 (xsd:nonNegativeInteger)
|
| dbo:wikiPageRevisionID
| |
| dbo:wikiPageWikiLink
| |
| dbo:yearOfConstruction
| |
| dbp:axleload
| |
| dbp:bogies
|
- as Ministerial cars, later between bogie centres, axle spacing (en)
|
| dbp:brakes
|
- Westinghouse (en)
- Westinghouse air brake (en)
|
| dbp:capacity
| |
| dbp:caption
|
- Van 611 ZD, in storage at the Seymour Railway Heritage Centre (en)
|
| dbp:carbody
| |
| dbp:carlength
|
- over body, over coupling points (en)
|
| dbp:code
| |
| dbp:coupling
|
- Screw (en)
- Screw, later autocouplers (en)
- screw, later autocouplers (en)
|
| dbp:depots
| |
| dbp:doors
| |
| dbp:factory
| |
| dbp:family
|
- Fixed-wheel carriages (en)
- Fixed-wheel stock (en)
|
| dbp:fleetnumbers
|
- 1 (xsd:integer)
- 252733 (xsd:integer)
|
| dbp:gauge
| |
| dbp:height
| |
| dbp:imagesize
| |
| dbp:lines
| |
| dbp:manufacturer
| |
| dbp:name
|
- Edinburgh later Mitta Mitta (en)
- Fixed-wheel guard's vans (en)
- Short-bodied, fixed-wheel guard's vans (en)
|
| dbp:numberbuilt
|
- 1 (xsd:integer)
- 4 (xsd:integer)
- Around 2,000 total (en)
- Roughly 750 (en)
|
| dbp:numberscrapped
|
- 1 (xsd:integer)
- 4 (xsd:integer)
- Most (en)
- Roughly 700 (en)
|
| dbp:numberservice
| |
| dbp:operator
|
- dbr:Victorian_Railways
- Victorian Railways (en)
- Daylesford Spa Country Railway, Victorian Goldfields Railway and Steamrail Victoria (en)
|
| dbp:refurbishment
|
- 1910 (xsd:integer)
- Each other (en)
|
| dbp:replaced
| |
| dbp:weight
|
- unloaded (en)
- unloaded
unloaded (en)
|
| dbp:wheelbase
|
- between axles; total and for four-wheeled vans (en)
|
| dbp:wikiPageUsesTemplate
| |
| dbp:yearconstruction
|
- 1899 (xsd:integer)
- From 1851 (en)
- From 1855 (en)
|
| dbp:yearservice
| |
| dcterms:subject
| |
| rdf:type
| |
| rdfs:comment
|
- The first passenger carriages of the Victorian Railways (VR) were fixed-wheel, with a mixture of first- and second-class bodies on either four- or six-wheeled underframes. They were built to the British side-loading, swing-door, cross bench compartment (non-corridor) style; later a saloon style was used to a limited extent, featuring fewer doors per side and perimeter seating - which increased total capacity by allowing more standing passengers. (en)
|
| rdfs:label
|
- Victorian Railways fixed wheel passenger carriages (en)
|
| owl:sameAs
| |
| prov:wasDerivedFrom
| |
| foaf:depiction
| |
| foaf:isPrimaryTopicOf
| |
| is dbo:wikiPageRedirects
of | |
| is dbo:wikiPageWikiLink
of | |
| is foaf:primaryTopic
of | |
