| dbo:abstract
|
- A positive locking device is a device used in conjunction with a fastener in order to positively lock the fastener. This means that the fastener cannot work loose from vibrations. The following is a list of positive locking devices:
* A split beam nut
* A castellated nut and a split pin
* A hex nut or cap screw and a tab washer
* A hex nut or cap screw and a lock plate
* Safety wiring with various types of fasteners 7-122. GENERAL. The word safetying is a term universally used in the aircraft industry. Briefly, safetying is defined as: "Securing by various means any nut, bolt, turnbuckle etc., on the aircraft so that vibration will not cause it to loosen during operation." These practices are not a means of obtaining or maintaining torque, rather a safety device to prevent the disengagement of screws, nuts, bolts, snap rings, oil caps, drain cocks, valves, and parts. Three basic methods are used in safetying; safety-wire, cotter pins, and self-locking nuts. Retainer washers and pal nuts are also sometimes used. 7-124d. Safety wire must be installed in a manner that will prevent the tendency of the part to loosen.
* A locking plate
* A tab washer (en)
|
