A Lay-Up process is a moulding process for composite materials, in which the final product is obtained by overlapping a specific number of different layers, usually made of continuous polymeric or ceramic fibres and a thermoset polymeric liquid matrix. It can be divided into Dry Lay-up and Wet Lay-Up, depending on whether the layers are pre-impregnated or not.Dry Lay-up is a common process in the aerospace industry, due to the possibility of obtaining complex shapes with good mechanical properties, characteristics required in this field. On the contrary, as Wet Lay-Up does not allow uni-directional fabrics, which have better mechanical properties, it is mainly adopted for all other areas, which in general have lower requirements in terms of performance.The main stages of the Lay-Up process
Attributes | Values |
---|
rdfs:label
| - Processo di Lay-Up (it)
- Lay-Up process (en)
|
rdfs:comment
| - A Lay-Up process is a moulding process for composite materials, in which the final product is obtained by overlapping a specific number of different layers, usually made of continuous polymeric or ceramic fibres and a thermoset polymeric liquid matrix. It can be divided into Dry Lay-up and Wet Lay-Up, depending on whether the layers are pre-impregnated or not.Dry Lay-up is a common process in the aerospace industry, due to the possibility of obtaining complex shapes with good mechanical properties, characteristics required in this field. On the contrary, as Wet Lay-Up does not allow uni-directional fabrics, which have better mechanical properties, it is mainly adopted for all other areas, which in general have lower requirements in terms of performance.The main stages of the Lay-Up process (en)
- Il processo di Lay-Up è un processo di formatura per i materiali compositi, in cui il prodotto finale è ottenuto sovrapponendo un numero specifico di strati differenti, solitamente costituiti da fibre polimeriche o ceramiche continue e da una matrice liquida polimerica termoindurente. Può essere suddiviso in Dry Lay-up e Wet Lay-Up, a seconda che gli strati siano di materiale preimpregnato o meno. Il Dry Lay-up è un processo molto comune nel settore aerospaziale, poiché permette di ottenere forme complesse con buone proprietà meccaniche (dato che il Wet Lay-Up non consente di avere tessuti unidirezionali, che hanno migliori proprietà meccaniche), mentre il Wet Lay-Up è adottato solitamente in tutti gli altri campi. Le fasi principali del processo di Lay-Up sono il taglio, la laminazione e (it)
|
foaf:depiction
| |
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
thumbnail
| |
has abstract
| - A Lay-Up process is a moulding process for composite materials, in which the final product is obtained by overlapping a specific number of different layers, usually made of continuous polymeric or ceramic fibres and a thermoset polymeric liquid matrix. It can be divided into Dry Lay-up and Wet Lay-Up, depending on whether the layers are pre-impregnated or not.Dry Lay-up is a common process in the aerospace industry, due to the possibility of obtaining complex shapes with good mechanical properties, characteristics required in this field. On the contrary, as Wet Lay-Up does not allow uni-directional fabrics, which have better mechanical properties, it is mainly adopted for all other areas, which in general have lower requirements in terms of performance.The main stages of the Lay-Up process are cutting, lamination and polymerization. Even though some of the production steps can be automated, this process is mainly manual (hence often referred to as the Hand Lay-Up process), leading to laminates with high production costs and low production rates with respect to other techniques. Hence, nowadays, it is mainly suitable for small series production runs of 10 to 1000 parts. (en)
- Il processo di Lay-Up è un processo di formatura per i materiali compositi, in cui il prodotto finale è ottenuto sovrapponendo un numero specifico di strati differenti, solitamente costituiti da fibre polimeriche o ceramiche continue e da una matrice liquida polimerica termoindurente. Può essere suddiviso in Dry Lay-up e Wet Lay-Up, a seconda che gli strati siano di materiale preimpregnato o meno. Il Dry Lay-up è un processo molto comune nel settore aerospaziale, poiché permette di ottenere forme complesse con buone proprietà meccaniche (dato che il Wet Lay-Up non consente di avere tessuti unidirezionali, che hanno migliori proprietà meccaniche), mentre il Wet Lay-Up è adottato solitamente in tutti gli altri campi. Le fasi principali del processo di Lay-Up sono il taglio, la laminazione e la polimerizzazione. Anche se alcune delle fasi di produzione possono essere automatizzate, questo processo è principalmente manuale - motivo per cui viene spesso chiamato Hand Lay-Up - portando a laminati con costi di produzione elevati e bassi tassi di produzione rispetto alle altre tecniche. Di conseguenza, al giorno d'oggi, è adatto principalmente per produzioni in piccole serie, da 10 a 1000 parti. (it)
|
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage redirect
of | |
is foaf:primaryTopic
of | |