About: Core (optical fiber)     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : yago:WikicatFiberOptics, within Data Space : dbpedia.org associated with source document(s)
QRcode icon
http://dbpedia.org/describe/?url=http%3A%2F%2Fdbpedia.org%2Fresource%2FCore_%28optical_fiber%29

The core of a conventional optical fiber is the part of the fiber that guides the light. It is a cylinder of glass or plastic that runs along the fiber's length. The core is surrounded by a medium with a lower index of refraction, typically a cladding of a different glass, or plastic. Light travelling in the core reflects from the core-cladding boundary due to total internal reflection, as long as the angle between the light and the boundary is greater than the critical angle. As a result, the fiber transmits all rays that enter the fiber with a sufficiently small angle to the fiber's axis. The limiting angle is called the acceptance angle, and the rays that are confined by the core/cladding boundary are called guided rays.

AttributesValues
rdf:type
rdfs:label
  • Núcleo (fibra óptica) (es)
  • Core (optical fiber) (en)
rdfs:comment
  • The core of a conventional optical fiber is the part of the fiber that guides the light. It is a cylinder of glass or plastic that runs along the fiber's length. The core is surrounded by a medium with a lower index of refraction, typically a cladding of a different glass, or plastic. Light travelling in the core reflects from the core-cladding boundary due to total internal reflection, as long as the angle between the light and the boundary is greater than the critical angle. As a result, the fiber transmits all rays that enter the fiber with a sufficiently small angle to the fiber's axis. The limiting angle is called the acceptance angle, and the rays that are confined by the core/cladding boundary are called guided rays. (en)
  • El núcleo de un cable de fibra óptica convencional es un cilindro de vidro o plástico que recorre toda la longitud de la fibra.​ El núcleo está rodeado de un medio con un índice de refracción más bajo, normalmente un revestimiento de un vidrio diferente o plástico. La luz que viaja en el núcleo se refleja en el límite núcleo-revestimiento debido a la reflexión total interna siempre y cuando el ángulo entre la luz y la frontera sea menos que el ángulo crítico. Debido a esto, la fibra transmite todos los rayos luminosos que entran en la fibra con un ángulo lo suficientemente pequeño con respecto al eje de la fibra. El ángulo de limitación se llama ángulo de aceptación, y los rayos que están restringidos por el límite núcleo/revestimiento se llaman rayos guiados. (es)
foaf:depiction
  • http://commons.wikimedia.org/wiki/Special:FilePath/Singlemode_fibre_structure.svg
  • http://commons.wikimedia.org/wiki/Special:FilePath/Optical-fibre.svg
dcterms:subject
Wikipage page ID
Wikipage revision ID
Link from a Wikipage to another Wikipage
sameAs
dbp:wikiPageUsesTemplate
thumbnail
has abstract
  • The core of a conventional optical fiber is the part of the fiber that guides the light. It is a cylinder of glass or plastic that runs along the fiber's length. The core is surrounded by a medium with a lower index of refraction, typically a cladding of a different glass, or plastic. Light travelling in the core reflects from the core-cladding boundary due to total internal reflection, as long as the angle between the light and the boundary is greater than the critical angle. As a result, the fiber transmits all rays that enter the fiber with a sufficiently small angle to the fiber's axis. The limiting angle is called the acceptance angle, and the rays that are confined by the core/cladding boundary are called guided rays. The core is characterized by its diameter or cross-sectional area. In most cases the core's cross-section should be circular, but the diameter is more rigorously defined as the average of the diameters of the smallest circle that can be circumscribed about the core-cladding boundary, and the largest circle that can be inscribed within the core-cladding boundary. This allows for deviations from circularity due to manufacturing variation. Another commonly quoted statistic for core size is the mode field diameter. This is the diameter at which the intensity of light in the fiber falls to some specified fraction of maximum (usually 1/e2 ≈ 13.5%). For single-mode fiber, the mode field diameter is larger than the physical diameter of the core, because the light penetrates slightly into the cladding as an evanescent wave. The three most common core sizes are: * 9 μm diameter (single-mode) * 50 μm diameter (multi-mode) * 62.5 μm diameter (multi-mode) (en)
  • El núcleo de un cable de fibra óptica convencional es un cilindro de vidro o plástico que recorre toda la longitud de la fibra.​ El núcleo está rodeado de un medio con un índice de refracción más bajo, normalmente un revestimiento de un vidrio diferente o plástico. La luz que viaja en el núcleo se refleja en el límite núcleo-revestimiento debido a la reflexión total interna siempre y cuando el ángulo entre la luz y la frontera sea menos que el ángulo crítico. Debido a esto, la fibra transmite todos los rayos luminosos que entran en la fibra con un ángulo lo suficientemente pequeño con respecto al eje de la fibra. El ángulo de limitación se llama ángulo de aceptación, y los rayos que están restringidos por el límite núcleo/revestimiento se llaman rayos guiados. El núcleo se caracteriza por su diámetro o área de sección transversal. En la mayoría de los casos la sección transversal debería ser circular, pero el diámetro está definido más rigurosamente como el promedio de los diámetros del círculo más pequeño que puede ser acotado del límite núcleo-revestimiento, y el círculo más grande que puede ser registrado dentro del límite. Esto permite desviaciones de circularidad debido a variación de manufactura. Otra estadística citada comúnmente para el tamaño del núcleo es el diámetro de campo de modo. Este es el diámetro en el cual la intensidad de la luz en la fibra cae a alguna fracción especificada de un máximo (normalmente 1/e2 ≈ 13.5%). Para una fibra óptica monomodo el diámetro de campo de modo es mayor que el diámetro físico del núcleo debido a que la luz penetra ligeramente en el revestimiento como una onda evanescente. Los tres tamaños de núcleo más comunes son: * Diámetro de 9 µm (monomodo) * Diámetro de 50 µm (multimodo) * Diámetro de 62.5 µm (multimodo)​ (es)
gold:hypernym
prov:wasDerivedFrom
page length (characters) of wiki page
foaf:isPrimaryTopicOf
is Link from a Wikipage to another Wikipage of
is Wikipage redirect of
is Wikipage disambiguates of
is foaf:primaryTopic of
Faceted Search & Find service v1.17_git139 as of Feb 29 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 08.03.3330 as of Mar 19 2024, on Linux (x86_64-generic-linux-glibc212), Single-Server Edition (62 GB total memory, 54 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software