In digital photography, a bias frame is an image obtained from an opto-electronic image sensor, with no actual exposure time. The image so obtained only contains unwanted signal due to the electronics that elaborate the sensor data, and not unwanted signal from charge accumulation (e.g. from dark current) within the sensor itself.
Attributes | Values |
---|
rdf:type
| |
rdfs:label
| - Bias frame (en)
- Bias Frame (it)
|
rdfs:comment
| - In digital photography, a bias frame is an image obtained from an opto-electronic image sensor, with no actual exposure time. The image so obtained only contains unwanted signal due to the electronics that elaborate the sensor data, and not unwanted signal from charge accumulation (e.g. from dark current) within the sensor itself. (en)
- Molto simile al dark frame, il bias frame è un'immagine ottenuta da un sensore ottico di tipo CCD (Charge Coupled Device) o CMOS per un tempo di esposizione nullo e a otturatore chiuso. L'immagine così ottenuta conterrà quindi soltanto la parte di rumore dovuta all'elettronica e non quella dovuta all'autoirraggiamento termico del sensore. (it)
|
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
Link from a Wikipage to an external page
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
has abstract
| - In digital photography, a bias frame is an image obtained from an opto-electronic image sensor, with no actual exposure time. The image so obtained only contains unwanted signal due to the electronics that elaborate the sensor data, and not unwanted signal from charge accumulation (e.g. from dark current) within the sensor itself. A bias frame is complementary to a dark frame, which has a charge integration time but in darkness.Since a dark frame contains unwanted signal including a fixed-pattern noise component, some of which corresponds to the bias frame, and some of which is due to dark current and is proportional to the exposure time, it is possible to obtain an image representing only the dark-current component by subtracting a bias frame from a dark frame. The resulting image allows obtaining an "artificial" dark frame when multiplied by a factor depending on exposure time and then added back to the bias frame. Although this technique is less accurate than shooting a dark frame for each specific exposure duration, it has the advantage of drastically reducing the time needed to obtain dark-frame data for dark frame subtraction. (en)
- Molto simile al dark frame, il bias frame è un'immagine ottenuta da un sensore ottico di tipo CCD (Charge Coupled Device) o CMOS per un tempo di esposizione nullo e a otturatore chiuso. L'immagine così ottenuta conterrà quindi soltanto la parte di rumore dovuta all'elettronica e non quella dovuta all'autoirraggiamento termico del sensore. Visto che all'interno di un dark frame il rumore è costituito da una parte fissa, che è appunto il bias frame, e da una dipendente dall'autoirraggiamento termico direttamente proporzionale al tempo di esposizione, sottraendo da un dark frame un bias frame è possibile ottenere un'immagine che contenga la sola informazione del rumore termico. Quest'immagine, se moltiplicata per un opportuno fattore dipendente dal tempo di esposizione e risommata al bias permette di ottenere un dark frame artificiale.Anche se meno preciso rispetto a un vero dark frame fatto di volta in volta, questo sistema può velocizzare le operazioni di ripresa riducendo drasticamente i tempi necessari per l'ottenimento dei dark frames. (it)
|
gold:hypernym
| |
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage disambiguates
of | |
is foaf:primaryTopic
of | |