The Kavachi engine, commonly known as the TCI-Tech, was developed by SAIC Motor, based on a re-engineering of the Rover K-series engine. It is used in Roewe and MG Motor vehicles. The 1796cc Kavachi engine is produced in two versions, a naturally aspirated producing 98 kW (131 bhp; 133 PS) at 6,000 rpm and 168 N⋅m (124 lb⋅ft) @ 4,500 rpm, and a turbocharged version producing 118 kW (158 bhp) at 5,500 rpm and 215 N⋅m (159 lb⋅ft) of torque from 2,500 to 4,500 rpm. It is Drive-by-wire. N Series was fitted into the relaunched MG TF in the UK and in the MG3 SW and MG7 in China.
Attributes | Values |
---|
rdf:type
| |
rdfs:label
| - SAIC Kavachi engine (en)
- 上汽Kavachi发动机 (zh)
|
rdfs:comment
| - Kavachi发动机(卡瓦齐发动机),一般在引擎罩上标注为TCI-Tech,由上汽集团开发,源自罗孚K系列发动机,使用于上汽旗下的荣威和MG汽车。 (zh)
- The Kavachi engine, commonly known as the TCI-Tech, was developed by SAIC Motor, based on a re-engineering of the Rover K-series engine. It is used in Roewe and MG Motor vehicles. The 1796cc Kavachi engine is produced in two versions, a naturally aspirated producing 98 kW (131 bhp; 133 PS) at 6,000 rpm and 168 N⋅m (124 lb⋅ft) @ 4,500 rpm, and a turbocharged version producing 118 kW (158 bhp) at 5,500 rpm and 215 N⋅m (159 lb⋅ft) of torque from 2,500 to 4,500 rpm. It is Drive-by-wire. N Series was fitted into the relaunched MG TF in the UK and in the MG3 SW and MG7 in China. (en)
|
foaf:name
| |
name
| |
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
Link from a Wikipage to an external page
| |
sameAs
| |
torque
| |
valvetrain
| - DOHC 4 valves x cyl. with VVC (en)
|
dbp:wikiPageUsesTemplate
| |
head
| |
manufacturer
| |
power
| |
predecessor
| |
production
| |
type
| |
has abstract
| - The Kavachi engine, commonly known as the TCI-Tech, was developed by SAIC Motor, based on a re-engineering of the Rover K-series engine. It is used in Roewe and MG Motor vehicles. The 1796cc Kavachi engine is produced in two versions, a naturally aspirated producing 98 kW (131 bhp; 133 PS) at 6,000 rpm and 168 N⋅m (124 lb⋅ft) @ 4,500 rpm, and a turbocharged version producing 118 kW (158 bhp) at 5,500 rpm and 215 N⋅m (159 lb⋅ft) of torque from 2,500 to 4,500 rpm. It is Drive-by-wire. UK engineering firm Ricardo plc were tasked with remedying the well known faults of the K series by SAIC Motor for its introduction into the Chinese marketplace. With a redesigned head, improved waterways, stiffened block as well as changing the manufacturing process and quality of material, the Kavachi is seen as the pinnacle of K-series development. As of 2015, with more than half a decade in the market, there have been no reported issues of head gasket failure on cars using the Kavachi engine. A point to note, the Kavachi engine is sometimes referred to and often confused with the N Series engine. The N Series is also a development of the original K Series but was in fact produced by Nanjing Automobile (NAC) a rival company at the time to SAIC. (later merged) N Series was fitted into the relaunched MG TF in the UK and in the MG3 SW and MG7 in China. (en)
- Kavachi发动机(卡瓦齐发动机),一般在引擎罩上标注为TCI-Tech,由上汽集团开发,源自罗孚K系列发动机,使用于上汽旗下的荣威和MG汽车。 (zh)
|
block
| |
configuration
| |
coolingsystem
| |
fuelsystem
| |
fueltype
| |
oilsystem
| |
fuel system
| |
fuel type
| |
block alloy
| |
cooling system
| |
head alloy
| |
oil system
| |
prov:wasDerivedFrom
| |
cylinder bore (mm)
| |
displacement (cc)
| |
piston stroke (mm)
| |
power output (kW)
| |
page length (characters) of wiki page
| |
configuration
| |
displacement (μ³)
| |
power output (W)
| |
production end year
| |
production start year
| |
cylinder bore (μ)
| |
piston stroke (μ)
| |
valvetrain
| |
manufacturer
| |
predecessor
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage redirect
of | |
is successor
of | |
is successor
of | |
is foaf:primaryTopic
of | |