Generalized Timing Formula is a standard by VESA which defines exact parameters of the component video signal for analogue VGA display interface. The video parameters defined by the standard include horizontal blanking (retrace) and vertical blanking intervals, horizontal frequency and vertical frequency (collectively, pixel clock rate or video signal bandwidth), and horizontal/vertical sync polarity. Unlike predefined discrete modes (VESA DMT), any mode in a range can be produced using a formula by GTF. These parameters are used by the XFree86 Modeline, for example.
Attributes | Values |
---|
rdf:type
| |
rdfs:label
| - Generalized Timing Formula (en)
|
rdfs:comment
| - Generalized Timing Formula is a standard by VESA which defines exact parameters of the component video signal for analogue VGA display interface. The video parameters defined by the standard include horizontal blanking (retrace) and vertical blanking intervals, horizontal frequency and vertical frequency (collectively, pixel clock rate or video signal bandwidth), and horizontal/vertical sync polarity. Unlike predefined discrete modes (VESA DMT), any mode in a range can be produced using a formula by GTF. These parameters are used by the XFree86 Modeline, for example. (en)
|
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
Link from a Wikipage to an external page
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
has abstract
| - Generalized Timing Formula is a standard by VESA which defines exact parameters of the component video signal for analogue VGA display interface. The video parameters defined by the standard include horizontal blanking (retrace) and vertical blanking intervals, horizontal frequency and vertical frequency (collectively, pixel clock rate or video signal bandwidth), and horizontal/vertical sync polarity. Unlike predefined discrete modes (VESA DMT), any mode in a range can be produced using a formula by GTF. A GTF-compliant display is expected to calculate the blanking intervals from the signal frequencies, producing a properly centered image. At the same time, a compliant graphics card is expected to use the calculation to produce a signal that will work on the display — either a GTF default formula for then-ordinary CRT displays or via a custom formula provided via EDID signaling. These parameters are used by the XFree86 Modeline, for example. This video timing standard is available for free. (en)
|
gold:hypernym
| |
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage redirect
of | |
is Wikipage disambiguates
of | |
is foaf:primaryTopic
of | |