An Entity of Type: WikicatStandards, from Named Graph: http://dbpedia.org, within Data Space: dbpedia.org

Standardization in oil industry seeks to promote a better standardization within the oil and energy industry. It promotes this objective by highlighting areas where standardization has worked well, where it has not, and why. This provokes discussions for better standardization. The overall purpose of the document is to issue a guideline on the application of IEC 61508 and IEC 61511 in the Norwegian Petroleum Industry, and thereby simplify the use of the standards.

Property Value
dbo:abstract
  • Standardization in oil industry seeks to promote a better standardization within the oil and energy industry. It promotes this objective by highlighting areas where standardization has worked well, where it has not, and why. This provokes discussions for better standardization. The overall purpose of the document is to issue a guideline on the application of IEC 61508 and IEC 61511 in the Norwegian Petroleum Industry, and thereby simplify the use of the standards. According to the Petroleum Safety Authority Norway (PSA), management regulations (§1 and §2), performance requirements shall be established for all safety barriers on an installation. For instrumented safety systems, special reference is made to IEC 61508 and this document as the recommended standard for specification, design and operation of such safety systems. Whereas IEC 61508 describes a fully risk-based approach for determining Safety Integrity Level (SIL) requirements, this document provides minimum SIL requirements for the most common instrumented safety functions on a petroleum production installation (ref. chapter 7). Deviations from these requirements may however be identified (ref. section 7.7), and in such case, the overall methodology and documentation should be in accordance with IEC 61508. (en)
dbo:wikiPageExternalLink
dbo:wikiPageID
  • 8305756 (xsd:integer)
dbo:wikiPageLength
  • 3263 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 1087244734 (xsd:integer)
dbo:wikiPageWikiLink
dbp:wikiPageUsesTemplate
dcterms:subject
rdf:type
rdfs:comment
  • Standardization in oil industry seeks to promote a better standardization within the oil and energy industry. It promotes this objective by highlighting areas where standardization has worked well, where it has not, and why. This provokes discussions for better standardization. The overall purpose of the document is to issue a guideline on the application of IEC 61508 and IEC 61511 in the Norwegian Petroleum Industry, and thereby simplify the use of the standards. (en)
rdfs:label
  • Standardization in oil industry (en)
owl:sameAs
prov:wasDerivedFrom
foaf:homepage
foaf:isPrimaryTopicOf
is dbo:wikiPageRedirects of
is dbo:wikiPageWikiLink of
is foaf:primaryTopic of
Powered by OpenLink Virtuoso    This material is Open Knowledge     W3C Semantic Web Technology     This material is Open Knowledge    Valid XHTML + RDFa
This content was extracted from Wikipedia and is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License