Port mirroring is used on a network switch to send a copy of all network packets seen on one switch port (or an entire VLAN) to a network monitoring connection on another switch port. This is commonly used for network appliances that require monitoring of network traffic, such as an intrusion-detection system.

PropertyValue
p:abstract
  • Port mirroring is used on a network switch to send a copy of all network packets seen on one switch port (or an entire VLAN) to a network monitoring connection on another switch port. This is commonly used for network appliances that require monitoring of network traffic, such as an intrusion-detection system. Port mirroring on a Cisco Systems switch is generally referred to as Switched Port Analyzer (SPAN); some other vendors have other names for it, such as Roving Analysis Port (RAP) on 3Com switches. An example of a SPAN configuration on a Cisco 2950 Switch is below. Monitor session 1 source interface fastethernet 0/1, 0/2, 0/3 Monitor session 1 destination interface fastethernet 0/4 encap ingress vlan 1 The above example mirrors data from ports 0/1, 0/2 and 0/3 to the destination port 0/4 using vlan1 for vlan tagging. To show the status of a SPAN monitor session use the following command. show monitor session 1 Where 1 is the session number from the above statement. (en)
p:hasPhotoCollection
p:reference
rdfs:comment
  • Port mirroring is used on a network switch to send a copy of all network packets seen on one switch port (or an entire VLAN) to a network monitoring connection on another switch port. This is commonly used for network appliances that require monitoring of network traffic, such as an intrusion-detection system. (en)
rdfs:label
  • Port mirroring (en)
skos:subject
foaf:page
p:redirect