In telecommunications, connectionless describes communication between two network end points in which a message can be sent from one end point to another without prior arrangement. The device at one end of the communication transmits data to the other, without first ensuring that the recipient is available and ready to receive the data. The device sending a message simply sends it addressed to the intended recipient. As such there are more frequent problems with transmission than with connection-oriented protocols and it may be necessary to resend the data several times. Connectionless protocols are often disfavored by network administrators because it is much harder to filter malicious packets from a connectionless protocol using a firewall. The Internet Protocol and User Datagram Protocol are connectionless protocols, but TCP/IP (the most common use of IP) is connection-oriented.

PropertyValue
p:abstract
  • In telecommunications, connectionless describes communication between two network end points in which a message can be sent from one end point to another without prior arrangement. The device at one end of the communication transmits data to the other, without first ensuring that the recipient is available and ready to receive the data. The device sending a message simply sends it addressed to the intended recipient. As such there are more frequent problems with transmission than with connection-oriented protocols and it may be necessary to resend the data several times. Connectionless protocols are often disfavored by network administrators because it is much harder to filter malicious packets from a connectionless protocol using a firewall. The Internet Protocol and User Datagram Protocol are connectionless protocols, but TCP/IP (the most common use of IP) is connection-oriented. Connectionless protocols are usually described as stateless because the endpoints have no protocol-defined way to remember where they are in a "conversation" of message exchanges. The alternative to the connectionless approach uses connection-oriented protocols, which are sometimes described as stateful because they can keep track of a conversation. (en)
  • En telecomunicaciones, no orientado a la conexión significa una comunicación entre dos puntos finales de una red en los que un mensaje puede ser enviado desde un punto final a otro sin acuerdo previo. El dispositivo en un extremo de la comunicación transmite los datos al otro, sin tener que asegurarse de que el receptor esté disponible y listo para recibir los datos. El emisor simplemente envía un mensaje dirigido al receptor. Cuando se utiliza esta forma de comunicación son más frecuentes los problemas de transmisión que con los protocolos orientado a la conexión y puede ser necesario reenviar varias veces los datos. Los protocolos no orientados a la conexión son a menudo rechazados por los administradores de redes que utilizan cortafuegos porque los paquetes maliciosos son más difíciles filtrar. El protocolo IP y el protocolo UDP son protocolos no orientados a la conexión, pero TCP es un protocolo orientado a la conexión. Los protocolos no orientados a la conexión son descritos generalmente como sin estado porque los puntos finales no guardan información para recordar una "conversación" de cambios de mensajes. La alternativa al enfoque no orientado a la conexión es utilizar protocolos orientados a la conexión, que son descritos a veces como con estado porque pueden seguir una conversación. (es)
  • Mit Nachrichtenverbindung bzw. Verbindung wird ein Nachrichtenweg bezeichnet, der aufgrund einer Wahlinformation, die eine Zielinformation darstellt, zwischen Endstellen in einem Nachrichtennetz geschaltet wird, um Nachrichten auszutauschen. Eine Kommunikationsart, bei der vor der Übertragung von Nutzdaten eine Nachrichtenverbindung zwischen Sender und Empfänger hergestellt werden muss, wird verbindungsorientiert genannt. Dies kann durch die Vermittlung einer Leitung oder durch den Aufbau eines logischen Kanals geschehen. Das Gegenteil von verbindungsorientiert ist verbindungslos. Eine Nachrichtenverbindung hat drei Phasen: Verbindungsaufbau Nachrichtenaustausch Verbindungsabbau Werden zwei Endstellen verbunden, wird dies als Punkt-zu-Punkt-Verbindung bezeichnet, sind es mehr als zwei, als Mehrpunktverbindung. Spezielle Formen der Mehrpunktverbindung können Dienste wie Rundruf oder Gruppenruf beinhalten. Nachrichtenverbindungen werden von Vermittlungsstellen geschaltet. Die Gesamtheit von Endstellen, Nachrichtenwegen und Vermittlungsstellen, die gemeinsam für den Aufbau von Nachrichtenverbindungen zum Nachrichtenaustausch dienen, wird als Nachrichtennetz bezeichnet. Eine Nachrichtenverbindung kann entweder auf Leitungsvermittlung oder auf Speichervermittlung geschaltet beruhen. Bei der Leitungsvermittlung wird für die Verbindung ein geschalteter Kanal mit fester Bandbreite bereitgestellt. Bei der Speichervermittlung wird ein logischer, also durch Adressierung festgelegter Kanal bereitgestellt; physikalisch werden die einzelnen Übertragungsabschnitte aber im Multiplexbetrieb von mehreren logischen Verbindungen benutzt. Daher wird eine speichervermittelte Verbindung auch als virtuelle Verbindung bezeichnet . Wahl- und Signalisierungsverfahren, mit denen Verbindungen auf- und abgebaut werden, gibt es sehr viele. In der Sprachkommunikation zählen Impulswahlverfahren, Mehrfrequenzwahlverfahren und Digital Subscriber System No. 1 dazu, im Internet TCP/IP. Ist die Verbindung fest geschaltet und kann sie von den Endstellen nicht abgebaut werden, so wird dies als semipermanente Verbindung (SPV) bezeichnet. Während es sich bei einer Standleitung um eine feste Verbindung handelt, die nicht über Vermittlungsstellen geführt wird, führt eine semipermanente Verbindung über fest geschaltete Nachrichtenwege in Vermittlungsstellen. Eine andere Bezeichnung für eine SPV ist Vorbestellte Dauerwählverbindung. (de)
p:hasPhotoCollection
rdf:type
rdfs:comment
  • In telecommunications, connectionless describes communication between two network end points in which a message can be sent from one end point to another without prior arrangement. The device at one end of the communication transmits data to the other, without first ensuring that the recipient is available and ready to receive the data. The device sending a message simply sends it addressed to the intended recipient. As such there are more frequent problems with transmission than with connection-oriented protocols and it may be necessary to resend the data several times. Connectionless protocols are often disfavored by network administrators because it is much harder to filter malicious packets from a connectionless protocol using a firewall. The Internet Protocol and User Datagram Protocol are connectionless protocols, but TCP/IP (the most common use of IP) is connection-oriented. (en)
  • En telecomunicaciones, no orientado a la conexión significa una comunicación entre dos puntos finales de una red en los que un mensaje puede ser enviado desde un punto final a otro sin acuerdo previo. El dispositivo en un extremo de la comunicación transmite los datos al otro, sin tener que asegurarse de que el receptor esté disponible y listo para recibir los datos. El emisor simplemente envía un mensaje dirigido al receptor. (es)
rdfs:label
  • Connectionless protocol (en)
  • Protocolo no orientado a la conexión (es)
  • Nachrichtenverbindung (de)
owl:sameAs
skos:subject
foaf:page
is owl:sameAs of