About: 9600 port

An Entity of Type: Thing, from Named Graph: http://dbpedia.org, within Data Space: dbpedia.org

The '9600 port' (also named data-jack or data-port) is an industry-specific name given to a special connector on the back of amateur radio HF, VHF, and UHF transceivers. It is used for connecting a packet radio modem or any other type of data-modem which uses audio tones to convey data. This port is capable of transmitting and receiving data at speeds of at least 9600 bits per second, but usually faster. This is achieved by bypassing the highpass, lowpass, preemphasis, and deemphasis filters normally contained in the microphone and speaker circuits of an FM transmitter and receiver.

thumbnail
Property Value
dbo:abstract
  • The '9600 port' (also named data-jack or data-port) is an industry-specific name given to a special connector on the back of amateur radio HF, VHF, and UHF transceivers. It is used for connecting a packet radio modem or any other type of data-modem which uses audio tones to convey data. This port is capable of transmitting and receiving data at speeds of at least 9600 bits per second, but usually faster. This is achieved by bypassing the highpass, lowpass, preemphasis, and deemphasis filters normally contained in the microphone and speaker circuits of an FM transmitter and receiver. Amateur radio data ports which are not "9600 capable" are typically limited to a max speed of 1200 to 3000 bits per second. Commonly this 9600-capable data port uses a 6-pin mini-DIN connector (shown to the right).This is the same physical connector-type as PS/2 port mice and keyboards. (en)
dbo:thumbnail
dbo:wikiPageExternalLink
dbo:wikiPageID
  • 49768059 (xsd:integer)
dbo:wikiPageLength
  • 4251 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 1091851281 (xsd:integer)
dbo:wikiPageWikiLink
dbp:wikiPageUsesTemplate
dcterms:subject
rdfs:comment
  • The '9600 port' (also named data-jack or data-port) is an industry-specific name given to a special connector on the back of amateur radio HF, VHF, and UHF transceivers. It is used for connecting a packet radio modem or any other type of data-modem which uses audio tones to convey data. This port is capable of transmitting and receiving data at speeds of at least 9600 bits per second, but usually faster. This is achieved by bypassing the highpass, lowpass, preemphasis, and deemphasis filters normally contained in the microphone and speaker circuits of an FM transmitter and receiver. (en)
rdfs:label
  • 9600 port (en)
owl:sameAs
prov:wasDerivedFrom
foaf:depiction
foaf:isPrimaryTopicOf
is foaf:primaryTopic of
Powered by OpenLink Virtuoso    This material is Open Knowledge     W3C Semantic Web Technology     This material is Open Knowledge    Valid XHTML + RDFa
This content was extracted from Wikipedia and is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License