A power cord, line cord, or mains cable is a cord or cable that temporarily connects an electrical appliance to the distribution circuits of an electrical power source via a wall socket or extension cord. The terms are generally used for cables using a power plug to connect to a single-phase alternating current power source at the local line voltage—generally 100 to 240 volts, depending on the location. The terms power cable, mains lead or flex are also used.

PropertyValue
dbpedia-owl:thumbnail
dbpprop:abstract
  • A power cord, line cord, or mains cable is a cord or cable that temporarily connects an electrical appliance to the distribution circuits of an electrical power source via a wall socket or extension cord. The terms are generally used for cables using a power plug to connect to a single-phase alternating current power source at the local line voltage—generally 100 to 240 volts, depending on the location. The terms power cable, mains lead or flex are also used. A lamp cord is a light weight ungrounded two wire cord used for small loads such as a table or floor lamp. The term cord set is also used to distinguish those cords that include connectors molded to the cord at each end. Power cables may be either fixed or detachable from the appliance. In the case of detachable leads, the appliance end of the power cord has a socket (female connector) rather than a plug (male connector) to link it to the appliance, to avoid the dangers from having a live protruding pin. Cords may also have twist-locking features, or other attachments to prevent accidental disconnection at one or both ends. A cord set may include accessories such as fuses for overcurrent protection, a pilot lamp to indicate voltage is present, or a leakage current detector. Power cords for sensitive instruments, or audio/video equipment may also include a shield over the power conductors to minimize electromagnetic interference.
  • Als Gerätestecker werden umgangssprachlich Kabelkupplungen beziehungsweise Kabelbuchsen für Netzspannung bezeichnet, die direkt an die Endgeräte eingesteckt werden und der Stromversorgung dieser elektrischen Verbraucher dienen. Am gespeisten Gerät ist das Gegenstück (ein Einbaustecker) angebracht. Entsprechende Netzanschlussleitungen bestehen aus einer flexiblen Netzzuleitung, die an einer Seite fest mit einem Schukostecker und an der anderen Seite mit einem Gerätestecker („weibliche“, berührungsgeschützte Geräte-Kabelkupplung) verbunden ist. Diese Bauweise ermöglicht den Austausch des Anschlusskabels, die Netztrennung des Gerätes oder die Auslieferung gleichartiger Geräte mit unterschiedlichen Geräte-Anschlussleitungen für Steckverbinder-Systeme verschiedener Länder. Die (spannungsführenden) Kontakte der Kabelkupplungen sind durch Isolierung und eine entsprechende Bauform gegen versehentliches Berühren geschützt. Gerätestecker und -steckdosen sind international genormt. Beispiele für derartige Normen sind die IEC 60320, in der die meisten der in diesem Artikel dargestellten Steckverbindungen definiert sind, und die IEC 60309, die Steckverbindungen für industrielle Anwendungen spezifiziert. Um Geräte von einem Gerät aus gemeinsam zu schalten, werden auch Netzanschlusskabel mit beidseitiger Geräte-Steckverbindung (1 x „männlich“, 1 x „weiblich“) gefertigt. Ein Beispiel ist das Netzkabel zum Anschluss eines Monitors an einen PC. Die Steckrichtung ist immer so gewählt, dass stets Berührungsschutz gewährleistet ist; das speisende Gerät trägt also eine Einbau-Buchse (weiblich), das gespeiste Gerät einen Einbau-Stecker. Die verschiedenen Typen unterscheiden sich voneinander in Strombelastbarkeit, Schutzleiteranschluss und Temperaturfestigkeit. Für Drehstrom-Anschlussleitungen siehe auch Drehstrom-Steckverbinder.
dbpprop:hasPhotoCollection
rdf:type
rdfs:comment
  • A power cord, line cord, or mains cable is a cord or cable that temporarily connects an electrical appliance to the distribution circuits of an electrical power source via a wall socket or extension cord. The terms are generally used for cables using a power plug to connect to a single-phase alternating current power source at the local line voltage—generally 100 to 240 volts, depending on the location. The terms power cable, mains lead or flex are also used.
  • Als Gerätestecker werden umgangssprachlich Kabelkupplungen beziehungsweise Kabelbuchsen für Netzspannung bezeichnet, die direkt an die Endgeräte eingesteckt werden und der Stromversorgung dieser elektrischen Verbraucher dienen. Am gespeisten Gerät ist das Gegenstück (ein Einbaustecker) angebracht.
rdfs:label
  • Power cord
  • Gerätestecker
owl:sameAs
skos:subject
foaf:depiction
foaf:page
is dbpprop:redirect of