Fused deposition modeling (FDM) is an additive manufacturing technology commonly used for modeling, prototyping, and production applications. The technology was developed by S. Scott Crump in the late 1980s and was commercialized in 1990. The FDM technology is marketed commercially by Stratasys, which also holds a trademark on the term. Like most other additive manufacturing processes FDM works on an "additive" principle by laying down material in layers.

PropertyValue
dbpedia-owl:thumbnail
dbpprop:abstract
  • Fused deposition modeling (FDM) is an additive manufacturing technology commonly used for modeling, prototyping, and production applications. The technology was developed by S. Scott Crump in the late 1980s and was commercialized in 1990. The FDM technology is marketed commercially by Stratasys, which also holds a trademark on the term. Like most other additive manufacturing processes FDM works on an "additive" principle by laying down material in layers. A plastic filament or metal wire is unwound from a coil and supplies material to an extrusion nozzle which can turn on and off the flow. The nozzle is heated to melt the material and can be moved in both horizontal and vertical directions by a numerically controlled mechanism, directly controlled by a computer-aided manufacturing (CAM) software package. The model or part is produced by extruding small beads of thermoplastic material to form layers as the material hardens immediately after extrusion from the nozzle. Several materials are available with different trade-offs between strength and temperature properties. As well as acrylonitrile butadiene styrene (ABS) polymer, the FDM technology can also be used with polycarbonates, polycaprolactone, polyphenylsulfones and waxes. A "water-soluble" material can be used for making temporary supports while manufacturing is in progress. Marketed under the name WaterWorks by Stratasys, this soluble support material is quickly dissolved with specialized mechanical agitation equipment utilizing a precisely heated sodium hydroxide solution.
  • Fused Deposition Modeling bezeichnet ein Fertigungsverfahren aus dem Bereich des Rapid Prototyping, mit dem ein Werkstück schichtweise aus einem schmelzfähigem Kunststoff aufgebaut wird. Dieses Verfahren basiert auf der Verflüssigung eines drahtförmigen Kunststoff- oder Wachsmaterials durch Erwärmung. Beim anschließenden Abkühlen erstarrt das Material wiederum. Der Materialauftrag erfolgt durch Extrudieren mit einer in der Fertigungsebene frei verfahrbaren Heizdüse. Die Schichtdicken liegen je nach Anwendungsfall zwischen 0,025-1,25 mm, die Wandstärke mindestens bei 0,2 mm. Bei der schichtweisen Modellherstellung verbinden sich damit die einzelnen Schichten zu einem komplexen Teil. Auskragende Bauteile können mit diesem Verfahren unter Umständen nur mit Stützkonstruktionen aus Pappe, Polystyrol oder ähnlichem erzeugt werden. Ausgangsbasis der Fertigung ist das rechnerinterne Datenmodell des Teils im STL-Format. Bild:MedModeler01. jpg|Stratasys FDM MedModeler - Am Anfang Bild:MedModeler02. jpg|Der Kunststoff wird aufgetragen Bild:MedModeler03. jpg|Modell fast fertig Bild:MedModeler04. jpg|Das Endergebnis - Ein Modell der Wirbelsäule, das mit Daten aus dem MRT erschaffen wurde.
  • Osadzanie topionego materiału (FDM ang. fused deposition modeling) - jedna z metod rapid prototyping. W metodzie tej nanoszony materiał przeciskany jest przez dyszę, ogrzaną do temperatury jego topnienia. Dysza kontroluje przepływ materiału i jest przemieszczana automatycznie według instrukcji programu CAD. Podobnie jak przy stereolitografii, model wytwarzany jest warstwa po warstwie. Metoda ta została wynaleziona w latach ’80 XX wieku, od lat ’90 jest jedną z najbardziej rozpowszechnionych metod rapid prototyping. Charakteryzuje się dokładnością +- 0,13 mm. Używana jest do tworzenia modeli testowych jak również, dzięki zastosowaniu w miarę wytrzymałych materiałów, do wykonywanie detali użytkowych. W FDM wykorzystuje się różne typy materiałów, różniące się wytrzymałością i temperaturą topnienia: ABS, poliwęglany, polifenylosiarczki i woski. Istnieją również techniki korzystające z materiałów rozpuszczalnych w wodzie
dbpprop:hasPhotoCollection
dbpprop:reference
rdfs:comment
  • Fused deposition modeling (FDM) is an additive manufacturing technology commonly used for modeling, prototyping, and production applications. The technology was developed by S. Scott Crump in the late 1980s and was commercialized in 1990. The FDM technology is marketed commercially by Stratasys, which also holds a trademark on the term. Like most other additive manufacturing processes FDM works on an "additive" principle by laying down material in layers.
  • Fused Deposition Modeling bezeichnet ein Fertigungsverfahren aus dem Bereich des Rapid Prototyping, mit dem ein Werkstück schichtweise aus einem schmelzfähigem Kunststoff aufgebaut wird. Dieses Verfahren basiert auf der Verflüssigung eines drahtförmigen Kunststoff- oder Wachsmaterials durch Erwärmung. Beim anschließenden Abkühlen erstarrt das Material wiederum. Der Materialauftrag erfolgt durch Extrudieren mit einer in der Fertigungsebene frei verfahrbaren Heizdüse.
  • Osadzanie topionego materiału (FDM ang. fused deposition modeling) - jedna z metod rapid prototyping. W metodzie tej nanoszony materiał przeciskany jest przez dyszę, ogrzaną do temperatury jego topnienia. Dysza kontroluje przepływ materiału i jest przemieszczana automatycznie według instrukcji programu CAD. Podobnie jak przy stereolitografii, model wytwarzany jest warstwa po warstwie.
rdfs:label
  • Fused deposition modeling
  • Fused Deposition Modeling
  • Osadzanie topionego materiału
owl:sameAs
skos:subject
foaf:depiction
foaf:page
is dbpprop:disambiguates of
is dbpprop:redirect of